SLX v2 Ceramic Coated Herb Grinder - 62mm
The VGrinder is manufactured from aircraft grade aluminum. It is specifically designed to provide ground materials for vaporizing. This grinder is not only beautiful but also very functional. This is a 3-component grinder with diamond cut teeth. We highly suggest using this grinder for best results. This grinder is backed by a lifetime warranty but rest assured it will last forever!
SLX v2 Ceramic Coated Herb Grinder
Introducing SLX, the first non-stick grinder! If you're sick of debris building up in your grinder, interfering and affecting the consistency of your grind as well as wasting precious, then SLX is for you.
Every SLX grinder is designed from top quality Aerospace-Grade 7075 T6 Aluminium and has an innovative ceramic non-stick coating that repels sticky resin materials.
SLX grinders contain no Teflon, PTFE, or any other carcinogenic materials. All materials used in their construction are 100% FDA certified and approved.
- Non-stick ceramic coating
- No imperfections that catch and slow you down. Just smooth threads and easy turning.
- Top Quality Screens
- Strong Magnets
- Unique Trapezoid-shaped teeth with 4 sharp cutting edges for a fluffy and consistent grind
- One set of threads
With 55 razor-sharp teeth in the standard size, a couple of turns is all it takes – even the toughest herbs don't stand a chance against this smooth operator!
Every SLX non-stick herb grinder features comfortable slab cuts and gentle separations on the top and bottom. These grips provide optimal leverage!
Maintaining for your SLX Grinder:
Though it doesn't need intensive maintenance, a little care will make your SLX will ensure that you have this grinder for years to come!
Though SLX grinders are non-stick, if your material has a high moisture content or you use an extraordinary amount of herb at one time, you may see some very light build up that is super easy to remove.
- Tap the grinder lightly on a solid surface to dislodge build up
- Use a soft brush to gently sweep out any remaining debris
Use of solvents: We recommend not using high % solvents to clean this grinder, it isn't necessary and it can tarnish the colour and logo. We also don't recommend using a metal tool to scrape your Grinder - again this isn't necessary and could potentially scrape the coating.